WINFAB 1600NE

nonwoven > environmental

Download PDF

WINFAB 1600NE is a needlepunched nonwoven geotextile manufactured using polypropylene fibers that are formed into a dimensionally stable network, which allows the fibers to maintain their relative position. WINFAB 1600NE resists ultraviolet deterioration, rotting, and biological degradation and is inert to commonly encountered soil chemicals.

PROPERTY
TEST METHOD
MARV English
MARV Metric
Weight
ASTM D-5261
16.0 oz/yd 2
544 g/m 2
Thickness
ASTM D-5199
165 mils
4.191 mm
Tensile Strength (Grab)
ASTM D-4632
390 x 390 lbs
1735 x 1735 N
Elongation
ASTM D-4632
50%
50%
CBR Puncture
ASTM D-6241
1125 lbs
5004 N
Trapezoidal Tear
ASTM D-4533
150 x 150 lbs
667 x 667 N
UV Resistance (500 hrs)
ASTM D-4355
70%
70%
Apparent Opening Size (AOS)*
ASTM D-4751
100 US Std. Sieve
0.150 mm
Permittivity
ASTM D-4491
.50 sec ??1
.50 sec ??1
Permeability
ASTM D-4491
.25 cm/sec
.25 cm/sec
Water Flow Rate
ASTM D-4491
45 gpm/ft 2
1833 lpm/m 2

Notes: Mullen Burst ASTM D-3786 has been removed. It is not recognized by ASTM D-35 on Geosynthetics. Puncture ASTM D-4833 has been removed. It is not recognized by AASHTO M288 and has been replaced with CBR Puncture ASTM D-6241

PROPERTY
 
Typical English
Typical Metric
Roll Dimensions
 
15 x 300 ft
4.6 x 91.5 m
Roll Area
 
500 yd 2
418 m 2

WINFAB’s Quality Control Laboratory receives GAI-LAP accreditation

WINFAB’s Quality Control Laboratory was audited by George Koerner with the Geosyntietic Institute and has been accredited by the Geosynthetic Accreditation Institute’s Laboratory Accreditation Program (GAI-LAP). This accreditation along with the company’s NTPEP accreditation demonstrates WINFA…

WINFAB Acquires Fabrication Company

Company President, Larry Booth, recently announced WINFAB acquisition of a Georgia based Fabrication Company. Assets from this purchase were relocated to WINFAB’s 1,000,000 square foot Nashville, GA manufacturing facility. The new fabrication division allows WINFAB customers access to custom ge…

Product Quick Links