WINFAB 270HP

woven > high-performance

Download PDF

WINfab 270HP is manufactured using high tenacity polypropylene yarns that are woven to form a dimensionally stable network, which allows the yarns to maintain their relative position. WINfab 270HP resists ultraviolet deterioration, rotting, and biological degradation and is inert to commonly encountered soil chemicals.

PROPERTY
TEST METHOD
MARV English
MARV Metric
Wide Width Tensile
ASTM D-4595
2640 x 2460 lbs/ft
38.5 x 35.9 kN/m
Wide Width Tensile (2% Strain)
ASTM D-4595
480 x 588 lbs/ft
7.0 x 8.6 kN/m
Wide Width Tensile (5% Strain)
ASTM D-4595
1212 x 1356 lbs/ft
17.7 x 19.8 kN/m
Wide Width Tensile (10% Strain)
ASTM D-4595
2340 x 2412 lbs/ft
34.1 x 35.2 kN/m
UV Resistance (500 hrs)
ASTM D-4355
80%
80%
Apparent Opening Size (AOS)*
ASTM D-4751
30 US Std. Sieve
0.60 mm
Permittivity
ASTM D-4491
.70 sec ˉ1
.70 sec ˉ1
Permeability
ASTM D-4491
.04 cm/sec
.04 cm/sec
Water Flow Rate
ASTM D-4491
50 gpm/ft 2
2037 lpm/m 2

Notes: Mullen Burst ASTM D-3786 has been removed. It is not recognized by ASTM D-35 on Geosynthetics. Puncture ASTM D-4833 has been removed. It is not recognized by AASHTO M288 and has been replaced with CBR Puncture ASTM D-6241

PROPERTY
 
Typical English
Typical Metric
Roll Dimensions
 
15 x 300 ft
4.6 x 91.5 m
Roll Area
 
500 yd 2
418 m 2

WINFAB’s Quality Control Laboratory receives GAI-LAP accreditation

WINFAB’s Quality Control Laboratory was audited by George Koerner with the Geosyntietic Institute and has been accredited by the Geosynthetic Accreditation Institute’s Laboratory Accreditation Program (GAI-LAP). This accreditation along with the company’s NTPEP accreditation demonstrates WINFA…

WINFAB Acquires Fabrication Company

Company President, Larry Booth, recently announced WINFAB acquisition of a Georgia based Fabrication Company. Assets from this purchase were relocated to WINFAB’s 1,000,000 square foot Nashville, GA manufacturing facility. The new fabrication division allows WINFAB customers access to custom ge…

Product Quick Links