WINFAB 2X2HF

woven > high-performance

Download PDF

WINfab 2x2HF is manufactured using high tenacity polypropylene yarns that are woven to form a dimensionally stable network, which allows the yarns to maintain their relative position. WINfab 2x2HF resists ultraviolet deterioration, rotting, and biological degradation and is inert to commonly encountered soil chemicals.

PROPERTY
TEST METHOD
MARV English
MARV Metric
Tensile Strength (Grab)
ASTM D-4632
320 x 320 lbs
1424 x 1424 N
Elongation
ASTM D-4632
15%
15%
Wide Width Tensile
ASTM D-4595
2400 x 2400 lbs/ft
35 x 35 kN/m
Wide Width Elongation
ASTM D-4595
12 x 8%
12 x 8%
Wide Width Tensile (2% Strain)
ASTM D-4595
240 x 240 lbs/ft
3.5 x 3.5 kN/m
Wide Width Tensile (5% Strain)
ASTM D-4595
780 x 1404 lbs/ft
11.4 x 20.5 kN/m
Wide Width Tensile (10% Strain)
ASTM D-4595
1800 x 2520 lbs/ft
26.2 x 36.8 kN/m
CBR Puncture
ASTM D-6241
1400 lbs
6230 N
Trapezoidal Tear
ASTM D-4533
125 x 125 lbs
556 x 556 N
UV Resistance (500 hrs)
ASTM D-4355
90%
90%
Apparent Opening Size (AOS)*
ASTM D-4751
40 US Std. Sieve
0.425 mm
Permittivity
ASTM D-4491
.70 sec -1
.70 sec -1
Water Flow Rate
ASTM D-4491
50 gpm/ft 2
2037 lpm/m 2

Notes: Mullen Burst ASTM D-3786 has been removed. It is not recognized by ASTM D-35 on Geosynthetics. Puncture ASTM D-4833 has been removed. It is not recognized by AASHTO M288 and has been replaced with CBR Puncture ASTM D-6241

PROPERTY
 
Typical English
Typical Metric
Roll Dimensions
 
15 x 300 ft
4.6 x 91.5 m
Roll Area
 
500 yd 2
418 m 2

WINFAB’s Quality Control Laboratory receives GAI-LAP accreditation

WINFAB’s Quality Control Laboratory was audited by George Koerner with the Geosyntietic Institute and has been accredited by the Geosynthetic Accreditation Institute’s Laboratory Accreditation Program (GAI-LAP). This accreditation along with the company’s NTPEP accreditation demonstrates WINFA…

WINFAB Acquires Fabrication Company

Company President, Larry Booth, recently announced WINFAB acquisition of a Georgia based Fabrication Company. Assets from this purchase were relocated to WINFAB’s 1,000,000 square foot Nashville, GA manufacturing facility. The new fabrication division allows WINFAB customers access to custom ge…

Product Quick Links