woven > monofilament

Download PDF

WINfab 2199 is manufactured using high tenacity monofilament polypropylene yarns that are woven to form a dimensionally stable network, which allows the yarns to maintain their relative position. WINfab 2199 resists ultraviolet deterioration, rotting and biological degradation and is inert to commonly encountered soil chemicals.

MARV English
MARV Metric
Tensile Strength (Grab)
ASTM D-4632
370 x 250 lbs
1647 x 1113 N
ASTM D-4632
15 x 15%
15 x 15%
CBR Puncture
ASTM D-6241
950 lbs
4228 N
Trapezoidal Tear
ASTM D-4533
100 x 60 lbs
445 x 267 N
Wide Width Tensile (Ultimate)
ASTM D-4595
2700 x 1740 lbs/ft
39.40 x 25.39 kN/m
UV Resistance (500 hrs)
ASTM D-4355
Apparent Opening Size (AOS)*
ASTM D-4751
70 US Std. Sieve
0.212 mm
Percent Open Area (POA)
ASTM D-4491
.28 sec ˉ1
.28 sec ˉ1
ASTM D-4491
.01 cm/sec
.01 cm/sec
Water Flow Rate
ASTM D-4491
18 gpm/ft 2
733 lpm/m 2

Notes: Mullen Burst ASTM D-3786 has been removed. It is not recognized by ASTM D-35 on Geosynthetics. Puncture ASTM D-4833 has been removed. It is not recognized by AASHTO M288 and has been replaced with CBR Puncture ASTM D-6241

Typical English
Typical Metric
Roll Dimensions
6 x 300 ft
12 x 300 ft
1.83 x 91.5 m
3.65 x 91.5 m
Roll Area
200 yd 2
400 yd 2
167 m 2
334 m 2

WINFAB’s Quality Control Laboratory receives GAI-LAP accreditation

WINFAB’s Quality Control Laboratory was audited by George Koerner with the Geosyntietic Institute and has been accredited by the Geosynthetic Accreditation Institute’s Laboratory Accreditation Program (GAI-LAP). This accreditation along with the company’s NTPEP accreditation demonstrates WINFA…

WINFAB Acquires Fabrication Company

Company President, Larry Booth, recently announced WINFAB acquisition of a Georgia based Fabrication Company. Assets from this purchase were relocated to WINFAB’s 1,000,000 square foot Nashville, GA manufacturing facility. The new fabrication division allows WINFAB customers access to custom ge…

Product Quick Links