WINFAB 2404

woven > monofilament

Download PDF

WINfab 2404 is manufactured using high tenacity monofilament polypropylene yarns that are woven to form a dimensionally stable network, which allows the yarns to maintain their relative position. WINfab 2404 resists ultraviolet deterioration, rotting and biological degradation and is inert to commonly encountered soil chemicals.

PROPERTY
TEST METHOD
MARV English
MARV Metric
Tensile Strength (Grab)
ASTM D-4632
400 x 315 lbs
1780 x 1402 N
Elongation
ASTM D-4632
15%
15%
CBR Puncture
ASTM D-6241
1150 lbs
5118 N
Trapezoidal Tear
ASTM D-4533
150 x 165 lbs
668 x 734 N
Wide Width Tensile
ASTM D-4595
3000 x 2760 lbs
43.8 x 40.3 kN
UV Resistance (at 500 hrs)
ASTM D-4355
90%
90%
Apparent Opening Size (AOS)*
ASTM D-4751
40 US Std. Sieve
0.425 mm
Percent Open Area(POA)
COE-02215
1%
1%
Permittivity
ASTM D-4491
0.96 sec ̅1
0.96 sec ̅1
Permeability
ASTM D4491
.07 cm/sec
.07 cm/sec
Water Flow Rate
ASTM D-4491
70 gpm/ft 2
2852 l/min/m 2

Notes: Mullen Burst ASTM D-3786 has been removed. It is not recognized by ASTM D-35 on Geosynthetics. Puncture ASTM D-4833 has been removed. It is not recognized by AASHTO M288 and has been replaced with CBR Puncture ASTM D-6241

PROPERTY
 
Typical English
Typical Metric
Roll Dimensions
 
15 x 300 ft
4.6 x 91.5 m
Roll Area
 
500 yd 2
418 m 2

WINFAB’s Quality Control Laboratory receives GAI-LAP accreditation

WINFAB’s Quality Control Laboratory was audited by George Koerner with the Geosyntietic Institute and has been accredited by the Geosynthetic Accreditation Institute’s Laboratory Accreditation Program (GAI-LAP). This accreditation along with the company’s NTPEP accreditation demonstrates WINFA…

WINFAB Acquires Fabrication Company

Company President, Larry Booth, recently announced WINFAB acquisition of a Georgia based Fabrication Company. Assets from this purchase were relocated to WINFAB’s 1,000,000 square foot Nashville, GA manufacturing facility. The new fabrication division allows WINFAB customers access to custom ge…

Product Quick Links